The Becker BXP 6401-2-(01) is a compact and lightweight single block Mode-S transponder. It is according to level 2 and class 2 and suited for VFR and IFR up to 15,000 feet.

This is the 150W model of the BXP6401 transponder.


Features

The transponder is equipped with extended squitter and SI code function and it provides an interface to the central aircraft data system. It allows ELS and supports EHS, ADS-B' via extended
squitter.

The Mode-S ICAO address and additional fixed data are stored in a separate address module AM 6400-1-(01), which is plugged on the transponder and remains in the aircraft, if the transponder will be exchanged. BXP 6401-2-(01) is designed for panel mounting and fits into a 2.25 inch cut out. A split version is also available.

The sunlight readable display can be illuminated and dimmed for night operation. The display shows the actual settings. The wide range of power supply voltage and the low power consumption make this transponder suitable for VFR as well as IFR.

The transponder is prepared for the connection of blind encoders from different manufacturers. The encoder can be connected to the transponder by a serial or a parallel interface.

BXP 6401-2-(01) is directly exchangeable to the ATC 4401-1 as the dimensions are the same and the main connector has the same pinouts


Specifications:

Transmit power>=150 Watt
VFR/IFR operation up to 50.000 feet.
Standard input for parallel Blind-Encoder,
Supplementary serial input for Becker Blind-Encoder
RS 422/RS 232 interface for ADSB-capability in combination with suitable data-source
Supply voltage 14 to 33 V DC
Software certified to DO178 B Level C
Operating temperature - 20 °C to + 55 °C (short-time +70 °C)



Becker Installation Manual > Please click here